bookmark_borderThe Best Electric Pool Heater

The freezing temperature of pools during winter prevents often prevents a good swim in the pool. With so many people asking what is the best electric pool heater on the market? We thought to bring you the top products we could find after a series of market survey and research. Come along as we discover them together, shall we?

Top Products on the Market

The best products on the market include the following:

1. FibroPool FH120 Above Ground Swimming Pool Heat Pump

This product has an output of 20,000 BTU’s and is rated to heat above ground pools up to 18-inch round or 12-inch x 24-inch oval. It can also be used for in-ground pool as it heats up to 7,500 gallons of water. It has a sleek profile with a weatherproof casing that is designed to accept different placement options. It features easy side access which makes it easy to access standard fittings thereby minimizing installation time.

Also, we like that it’s a clean, electric heater that reduces the harmful environmental effect of the more traditional gas-powered heat pumps. It is energy-efficient, operating at an average of 16 cents per hour.

It helps you extend your swimming time as it ensures you will be comfortable and have the ideal temperature of 40o. With an easy-set digital panel control and optional extension add-on, it enables you to adjust it right from your home. Lastly, we like that it has a rugged design, hence it can withstand any element for a long time.


  • It is energy efficient
  • It is durable and long-lasting


  • It does feature an installation manual

2. FibroPool FH55 In Ground Swimming Pool Heater

It has an output of 55,000 BTU and can heat up to 10,000 gallons of water. It has an all-metal, enamel-coated casing that is built to be durable even when it’s exposed to harsh weather conditions or a long time while still protecting its inner elements.

It features a digital display which makes it easy to adjust your setting as well as installation; the installation takes only about 30 minutes, although it will require 220v of electricity and a standard 110v circuit.

It is rated by the US Department of Energy as a top energy-efficient system with 25 cents per hour. It is clean, efficient, has a sleek and rugged design.


  • It can withstand harsh weather conditions for a long time 
  • Installation is smooth, easy and swift


  • It only raises water a few degrees above air temperature

3. Fibropool FH 220 Swimming Pool Heat Pump

It pumps with a Coefficient of Performance of 4.85 stands and is ideal for small pools of 18 feet diameter for above ground pool and also spas with similar size, heating a maximum of 7,500 gallons of water. 

It is compact and lightweight with 20,000 BTU/hr. heat pumps. It operates at 220 volts-60HZ USA voltage heat and cool modes, the package comes with union connectors as well as hose adapters along with 1 ½ -inches PVC plumbing. Weighing 100 lbs., the hoses measure 1 ½-inch or 1 ¼-inch. It is ideal for all hot tubs.


  • It has a low operating cost
  • It has convenient operations and connections


  • Only ideal for small pools

4. HappyBuy 11KW 220V Electric Pool Heater Swimming Pool Electric Heater

This pool heater is ideal for thermostats as it has a power of 11KW, a volt that ranges between 220 to 240, a current of 50A and aluminum-coated plate. It has a control system that constantly monitors the running status of heater parts and in the case of an incident or default, it displays a hint message. However, this feature must be wired by the user.

It features a manual reset temperature control switch which cuts off the system once there is a power surge thereby preserving the heater and saving it from damage. 

It also has wide use as it can be used for a pool with less than 5CBM, a massage pool and even hot spring to heat the water and keep it warm for a long time. It can also assist heat pumps during heating.


  • It has a versatile use
  • It features an efficient temperature control switch


  • The quality could be improved upon

5. Hayward CSPAXI11 11 Kilowatt Electric Spa Heater

The product features all the sophisticated qualities as well as capabilities that make for a good pool heater. It is ideal for compact space as it fits quite well into it, it is also easy to install and service. 

It is made with a 304 stainless steel tank, a 304 stainless steel threaded head and a safety sensor electric heating element. Also, since it’s made of a service-ease design, it gives it easy access to the internal control of the heater.

We like that it has an indicator light which points out when there is a problem, it is UPS shippable and can work well for spa skirts and steps.


  • It features an indicator light
  • Inner control is easy to access


  • The keypad requires constant maintenance

FAQs on Best Electric Pool Heater

Q: What Size of Electric Pool Heater Do I Need?

A: There are varying preferences with regards to the size of an electric pool heater. The size to use depends on how frequent a pool is used, the purpose as well as other factors. Typically, the most powerful electric pool heater is around 140, 000 BTUs.

Q: How to Wire an Electric Pool Heater?

A: To wire an electric pool heater to take the following steps:

  • Choose the heater location
  • Cut the PVC pipe
  • Connect the PVC pipe to the heater
  • Complete the installation

Q: How Much is an Electric Pool Heater?

A: Several factors affect the cost of an electric pool heater. However, on average, an electric pool heater costs about $100 to $200 to operate per month


Even through the freezing days of winter, the best electric pool heater ensures you have a pleasurable time in your pool for a long time to come.

Having reviewed the best products we could find on the market, you no longer have an excuse to stay indoors when you could be having the time of your life. So, go ahead and make your choice.

bookmark_borderThe Best Above Ground Pool Pumps

A clean and healthy swimming pool ensures your family is not exposed to dangerous waterborne diseases. Maintaining a pool requires hordes of methods and associated equipment. One of the key machines in pool maintenance are pool pumps. The best above ground pool pump functions to continue the pool water circulation.

After eight hours of research and speaking with people who own and use it, we are able to finally answer the eternal question ‘What is the best above ground pool pump on the market?

Customer Reviews of the Six Best above Ground Pool Pumps

It is no secret that customer online reviews play a significant role in the buyers’ decision making across all the industries. Online reviews can help in product development and competitive analysis by offering valuable insight into the products. 

Customers’ reviews strengthen a product’s credibility and have the power to influence the users’ decisions. These reviews allow the buyers to research for the efficiency of the products, and how they are beneficial. One of the studies shows that 90% of the users read customer reviews before buying a product. We have spent a considerable amount of hours to find the six best above ground pool pumps based on the customers’ reviews. 

1. Hayward PowerFloLX – SP1580X15 1

Hayward PowerFloLX – SP1580X15 is known to be one of the most energy-efficient pool pumps at any speed. The fast shipping and the genuine authenticity of the Hayward pump are the USP of the product. These two features are making miracles in the customer base for this product. The pump is just seamless in its functioning capability. To add more feathers to the cap is its zero noise emission features that make it an absolute darling to the pool users.

We spoke with Gary Goldstein from Kentucky, a 54 year old father and salesman who has been using the Hayward PowerFloLX for several months now. Here’s what he had to say:

To start with, the installation was simple and hassle-free.  However, a new adapter was needed for connecting to the previous hoses that I own. The one thing that was to be done was to rotate the discharge port, which however is not a big deal. The best part of this machine is that it is practically noise-free. 

The sound limit of sixty-four dBs makes the use of the pump a soothing and quiet experience. All in all, I am very pleased with this pump as since the day I installed it, my pool has been the cleanest pool and my electricity bill has gone down.

2.  Hayward PowerFlo Matrix – SP15932S

The installation of Hayward PowerFlo Matrix SP15932S is very easy. The pressure is well maintained even in low setting thus making this product power and pocket-friendly. This pump provides the noise free experience. Even in the highest setting, the pump cannot be heard more than some feet afar. The fast shipping pump is the USP of the product. 

We talked to John McCoy from Kansas, a 36 year old young man who has been using the Hayward PowerFlo Matrix SP15932S for the last decade. He happily confirmed:

I am a proud owner of the Hayward PowerFlo Matrix for more than 12 years. This product has been ordered to replace a dead Hayward pump with a power of one and a half HP. The prime and the best difference between these two pumps is the noise-free experience that Hayward PowerFlo Matrix provides. The second USP of this product is its fast shipping that made me a very happy customer of this product in particular. The installation process was a piece of a cakewalk for our 24 feet diameter round pool. 

3. Harris ProForce – H1572730

Harris ProForce – H1572730 provides magic to the pool water. It helps in making the algae pool water so clear that even the bottom is visible after just a couple of hours after its installation. Another pro of the product is its noise free feature. The noise-free experiences make the customers quite happy thereby providing ample recommendations to potential future buyers.

Joana Stine, a resident of Gerogia, aged 31 years says:

I had this product shipped to replace my older Hayward pool pump, which had completely stopped working. For the two weeks, the previous pump had not worked; green algae had accumulated in the pool. This product after installation and a shocking amount of two bags did magic to the pool water. The best part is since I have been using the same pump for the last decade, and re-ordering the same upon its failure speaks tons of its goodwill for pool water purification and maintenance.I highly recommend this product to everyone! 

4. Blue Wave Maxi Replacement – NE6171B

The trio features of built, noise reduction and looks make this product extremely alluring to the customers. The reasonable pricing of the product also adds to its charm. The lid is quite large that makes its maintenance simple and easy since one can peep at the basket effortlessly and determine if it needs to be cleaned or not.

We spoke to Petunia Darcy, from Colorado, a 42 years old ex. Air Hostess who has been using this product since 5 years. She happily says:

I am extremely happy with the product. It’s been 5 years now! The fast shipping, attractive looks, and affordable rates make this product my favorite. Installation was simple and worry free. It doesn’t take much effort to clean the pump. If you are looking for an above ground pool pump, just go for it without a single thought. 

5. Krystal Clear Filter Pump with Sand from Intex 5

The operational feature of this pump is just like magic. Even upon maximum pool usage, you wont observe any gunge or haziness. Also, cleaning and maintaining this pump is so easy that it feels like heaven. The shipping is extremely fast. The installation is very simple and does not take much time. 

Ruth Smith from California, a 39 years old father and contractor has been using this product since 9 years, and very happy with its working. Here is what he said:

Our pool is 18 feet wide and has a capacity of about 5500 gallons. Getting this product shipped was simply amazing, as the installation could not get any easier. The previous hose fitted perfectly in this new machine thus saving my effort and money. The quiet functioning of the pool pump will definitely sit well with the customers.Last but not the least; I have not come across such an efficient filter during my trysts with regular pool maintenance.

6. 28633EG Krystal Clear Filter Pump with Cartridge from Intex

The easy installation procedure of this product makes it quite demanding in the market. The longevity of the filters also adds to its charm amongst the users. During a full swing, the filters need replacement every two weeks.

We spoke with Mark Rowell, from texas, a 38 years old real estate agent who has been using it for several months now. He says: 

I would recommend this pump to any potential and future buyers because of its efficient yet effective functioning to circulate the pool water and keep it clean. While using this pump, minimal chemicals are required in the pool, thereby making it environment-friendly and healthy. Also, the high power makes the pool mirror a Jacuzzi bath. A miraculous product! 

What Is An Above Ground Pool Pump?

Swimming pools are synonymous with a leisure-filled summer. However, maintaining a swimming pool in its pristine condition is no easy feat. As the name suggests, an above ground pool pump is one that functions from above the ground (not below water level). Such pumps are the most essential elements in pool sanitation. It is because these machines are the driving factors for efficient water circulation in the pool. 

A stagnant watered pool would not only look dirty but would also be hazardous to health with a high concentration of the chemicals that are usually added to the pool water. In addition, these pumps also act as a filtration system keeping unwanted elements at bay from your beloved pool.

Before we go ahead for searching the best above ground pool pump on the market, let us have a look at the Frequently Asked questions not only about pool pumps but also about pool sanitation. This section would help you with a holistic comprehension of your pool and the care it needs as well.

Why do we need a pool pump?

Pool pumps are necessary because of two reasons:

  • They help to remove any external foreign particles while filtering out the water continually.
  • Mixing of the various chemicals in the pool is effectively done by the water circulation process that the pool pump does efficiently.

How does a pool pump function?

The functional process of a pool pump is rather easy. It has three major parts: the motor, the trap, and the impeller. It sucks the water from the pool (from both the main drains and skimmers), filters it through the trap and returns the filtered water back to the pool.

How to install above ground pool pump?

The availability of above ground pool pumps has made the process of pool cleaning not only easy but also has been easy on the pockets. Installing such pumps is simple and does not involve much hassle.

In order to install such pumps, the below equipment are needed:

  • Measuring Tape
  • Pliers for water pump
  • Level and Shovel
  • Sand/ Cartridge
  • Screwdrivers
  • Patio Pavers
  • Hose Clamps
  • Flex Hose

Following the below easy steps would ensure a robust pool pump for your beloved pool:

  • The pump and the filter must be placed near to the skimmer, preferably with a few meters. Take measurements of the area in which you intend to fit the pump along with the filter.
  • Dig a hole in that intended area as deep as the height of the patio paver block. Level the dugout area so that the patio block sits upright. Place the filter pump duo on the block
  • Take one hose of the pump and connect it to the skimmer. One end of the hose is connected with the aid of hose clamps that are screwed in tightly to the skimmer basket’s bottom. The other loose end of the hose is clamped to the pump front. Both ends of the hose are screwed tightly to prevent any possible leaks.
  • Take the return hose and clamp it to the return drain of the pool. The other loose end of the hose is clamped to the return opening situated on the usually on the filter top. These clamps on the hose need to be tightly screwed as well.
  • In the next step, the filter discharge needs to be connected. Some types of pool pumps have a unified pump and filter combo that just needs tightening with the aid of large pliers made for water pumps. In case, the pump and filters are not conjoined, then another hose is needed to connect them. One end of the hose goes on pump top and the other end goes to the filter where it is marked as ‘pump in’.
  • The filter is then filled up with cartridge or sand. It is then followed by priming the pump so that it is water-filled. Once the setup is complete, then connect the pump to the power source and start filtering your pool water.

How to prime above ground pool pump?

A pool pump needs to be primed to remove any air blockage and ensure smooth water flow to and from the pool. Priming a pool pump is simple and hassle-free. The following steps would help easy priming of a pool pump:

  • First, the pump needs to be disconnected from the power source.
  • Next, relieve the built-up air pressure from the filter and pump. This can be done by opening the valve for air relief. In addition, all the shut-off valves (if any) should be kept open. This process ensures that water is freely flowing through the system.
  • Check the water level in the pool. It should cover up the skimmer. In case it is not then more water needs to be added to bring the water level as desired.
  • The strainer basket needs to be clean as well in order to ensure smooth water flow. The basket needs to be removed, and any kind of foreign elements like leaves, twigs, etc. must be cleaned. 
  • The housing of the pump needs to be filled with water, measuring about two to three gallons. Check for the O-ring in the strainer housing’s lid. This ring should be intact and not stretched or worn out.
  • The strainer housing is closed and the pump is plugged. The housing should be water-filled and priming should commence.

Before, plugging in the pump to the power source, make sure that all the joints are screwed tightly and the water level is maintained in order to prevent any air bubbles seeping inside the pump.

How to clean above ground pool pump basket?

The basket should be regularly cleaned so that the pump can function smoothly without any overload. The following steps would definitely ensure a clean and tidy basket for pool pump:

  • The power source of the pool pump must be turned off along with the valves of the main drain and skimmer.
  • The next step is to remove the lid of the pump and take out the basket.
  • Clean the basket thoroughly and then dry it.
  • Replace the basket; put the lid of the pump back along with the O-ring
  • Open the valve of the main drain and the air valve on the filter
  • Turn the power source of the pump back
  • When the priming of the pump is done, then open valves of the skimmer one by one consecutively
  • Steady water flow would indicate the air valve to be closed and the pool pump to be used as is

The basket can turn brittle over time. Make sure of its condition every time it is cleaned so that no broken pieces are trapped in the pump. In addition, the basket should be dry before re-installing. Therefore, it is recommended to have another set in order to have an easy as well as hassle-free cleaning.

How to winterize above ground pool pump?

The process to winterize above ground pool pump is extremely important since any water that is frozen into ice during the winter season would cause severe damage to the pump. The below steps when followed helps you to keep away from such hazards and problems:

  • Firstly, unplug the power source from the pool pump followed by the removal of the lid.
  • Next, drain plugs must be removed. Usually, they located at the bottom.
  • Any residual water in the impeller must be removed after all the water has been drained out. It can be done by turning the pump on for just a second or two.
  • All the other sections of the pump like a filter, return outlets, pumps, skimmers, etc. must be made completely free of water. This can be done by blowing the parts with the aid of a shop vacuum.
  • When dried, all the components of the pump and filter must be re-fitted, thus completing the process of winterizing the pump

Should we be using an extension cord for the above ground pool pump?

An above-ground pool pump needs a huge amount of power. Therefore, a dedicated power source for such pool pumps is highly recommended. Even though they can run on extension cords, still there is a chance of overheating. This issue of overheating will not only be harmful to the pump’s longevity but would also damage the electrical circuit of the building in general.

Should the above ground pool pump run all the time?

It is quite a common notion that pool pumps must be in constant running condition while the pool is in use. However, in reality, this practice is not in all environments or pocket-friendly. It is true that the pool water needs filtration in every 24 hours. However, that does not mean that the pump needs to be turned on constantly.

It is recommended that the pump is kept running for short spans for about 6 hours. The time gap between two runs must not be more than 5 hours. If it is the peak of summer or in case, the pool is huge then the pump should be turned on for as long as 8 hours daily as well.  It is recommended that external debris should be removed manually rather than depending on the pump filtration process.

Three Things to Take Into Consideration When Getting an Above Ground Pool Pump

blob: an image file, pick one from your media library, or add one with a URL.UploadMedia LibraryInsert from URL

You need to consider a few important points before going to buy an above ground pool pump:

1- Pool Size

The pool size must be taken into consideration for buying a pump. The capacity of the pump is determined by the pool size. Therefore, it is necessary to have the pool dimensions studied before getting a pump for its maintenance and filtration.

2- Electrical Requirements

Make sure that the building electrical capacity can withstand the functioning of such motors.

3- Maintenance Needs and Spare Parts

The equipment needed for the maintenance along with the spare parts must be locally available; in order to prevent any form of issues in case of unfortunate breakdown of the machine.


In the current market, which is steaming with a plethora of good and proper products, it can be quite challenging to the best above ground pool pumps. However, one should not be overwhelmed by such itsy bitsy challenges. In order to face them the most effective weapon is research and understanding.

The first step is to understand what exactly the requirement of the pool is concerning the pool pump. Once the requirement is clear then the next step is research. It is always advised to ensure thorough research before getting any such product. The research can be done in many ways like going through real reviews across multiple sites on the internet.

In addition, physically looking out for pumps in shops can also add a variant to the research factor. However, too much of it can be confusing. Therefore, a balance should be stroked and the best deal must be enjoyed when buying the best-suited pump for your beautiful pool.

bookmark_borderHigh PH In Pool Safe To Swim?

Making your pool safe to swim requires consistent examination of the chemical level of your pool, such as the pH level of the pool. The pH level of any pool is the measure if the pool’s acidity and alkalinity and if you try to swim in a pool with an unideal level of alkalinity, it may be harmful to your health.

High PH In Pool Safe To Swim?

What is the Ideal pH Level to Swim?

When the pH level is at the ideal number, it helps the chlorine work perfectly and protects the skin and eyes from harsh chemicals. The right pH level of your pool would help the chlorine component protect your eyes and skin from harsh chemicals. The ideal pH level for swimmers is between 7.2 and 7.8, according to the Centre for Disease Control and Prevention. This level coincides with the pH level of most swimmers body, ensuring the water doesn’t cause any problem for them.

Is High pH in Pool Safe to Swim?

When the pH level of your pool is high, it is considered alkaline and can cause a problem for the pool owner as well as the pool. A pH level of above 7.8 would increase the alkalinity level of your pool and cause the pool water to become cloudy. It would also scale along the sides of your pool. A high pH level causes chlorine and other chemicals from adequately functioning, which lets bacteria in your pool survive. 

You may not notice the difference with bacteria in the pool, but if it finds its way into your body, it could become harmful.

Is It Safe to Swim in Pool with Low Alkalinity?

When the alkalinity level of your pool is low, that means your water is lower than 7.0 and highly acidic. You might also get to feel the difference in the pool as you swim. A low pH level in your pool can cause your eyes to burn while swimming underwater or irritate your skin. Just like a high pH level, chlorine and other chemicals do not work correctly when the pH level is low, causing all the dangerous bacteria to live freely. This can cause your pool metal to corrode while wrinkling the vinyl linings of the pool.

What Should Be Done?

To adjust your pH level at this stage would require carefulness as any mistake can throw the pool water off balance. It would be best if you always started at the shallow end when pouring additives into your pool. If the pH level is high, normalize it by adding dry acid to reduce the pH level. The amount you add depends on the pH reading of the pool. If your pH level is low and needs increasing, add sodium bicarbonate which can be easily found in baking soda to raise the level. You should check to see if the pool’s level is stable after two days to know if you need to add more substance to to raise or lower the pH level.


It isn’t safe to swim in a high pH level pool as this can be dangerous to the health and even detrimental to your pool. So always perform a chemical test to know the level of the chemical in the pool before use.

bookmark_borderHow Much Borax To Raise pH In Pool?

Borax also known Sodium Tetraborate or Sodium Borate or Disodium Tetraborate, has many uses as it does names for a chemical compound.  It is popularly known to be a household cleaning agent used to bleach white shirts. Apart from being a household cleaning agent, it can also serve as the main ingredient in slime. This goes to show that borax is such a versatile chemical with lots of uses. Now Borax can also be used to clean a swimming pool. 

How Much Borax To Raise pH In Pool?

Keeping your swimming pool clean and sparkling is such a stressful process that involves a lot of action such as checking the water level, cleaning out your skimmer, cleaning your filter, vacuuming the bottom of the pool, and balancing the chemistry of the water. While balancing the chemistry of your pool and trying to avoid increasing one level over the other, you can use borax which acts as a useful pH leveler and helps prevent the growth of algae in your pool.  In this article we would reveal how much borax to raise pH level in pool.

Benefit of Using Borax

Adding borax to your pool is an effective way of stabilizing the alkalinity of your pool. It also works as a pH shocker for your swimming pools. Normally, pool owners make use of baking soda and soda ash whenever they want to stabilize the chemistry level. But these chemicals have disadvantages such as while it raises the pH level, they also raise the alkalinity level of the water. When the alkalinity level rises, it destabilizes the pH level which defeats the reason for putting chemicals into your pool. 

Unlike these two chemicals above, Borax stops your pH level from fluctuating while the alkalinity level remains the same. It also stops the growth of algae through proper maintenance of the pH level of the pool which allows the chlorine sanitize the water.

When the borax is dissolved in your water, it doesn’t evaporate; it remains in the water permanently. This makes your pool water sparkling, soft, and ready to swim plus you’ll be using less chlorine which ensures you save money.

How Much Borax to Raise pH Level in Pool

If you want to raise the pH level of your pool, you’ll have to conduct a pH test first to determine the pH level of your pool. If your pool’s pH level is lower than the normal range of 7.2-7.6, you’ll need to raise the pH level. 

Add 20 ounces of Borax to every 5000 gallons of water added to your pool. This calculation is estimated as different chemical factors may require a different quantity of borax for your pool.


Stabilize your pool quickly using the Borax chemical. It is also a good equipment for keeping your pool clear of algae growth and any other form of dirt.